These bolt pattern adapters allow you to run 5x114 wheels on 5x100 Subaru cars.

Our spacers are CNC-machined from super-strong 7075-T6 aluminum. The outside of each spacer is knurled for easy handling. Each spacer has reliefs cut into the hub side so you can easily pry the spacer loose if you need to. Air channels cut into the backside ensure they seat down flat every time, and machined reliefs also reduce weight.

The hardware is high-grade steel, and both studs and lug nuts are black-coated for maximum corrosion resistance. Each spacer is laser-marked with the bolt pattern and thickness, so if they ever do end up in your tool drawer, you'll know at a glance what they are.

The spacers are hubcentric to both your Subaru car and the wheel, too. Available in 15mm, 20mm, or 25mm thickness. Get out your ruler and measure twice!

Note that on 15mm and 20mm spacers, the existing studs WILL protrude slightly from the surface of the spacer. The wheel you are installing MUST have pockets in the back side to clear the stud and lug nut. Most (but not all) aftermarket wheels will fit, but some OEM Subaru STI wheels will NOT clear without enlarging the pockets on the back side of the wheel.

Torque lug nuts to 75-80 ft-lbs. Inspect and re-torque if necessary after 100 miles.

Important note! Bolt pattern adapters that have been installed on a car -- even once -- may not be returned.

Sold as a set of four bolt pattern adapters, plus lug nuts.

Fits all 5x100 Subaru models.